Scanning documents and entering data into Medisoft
-
- Posts: 9
- Joined: Wed Sep 24, 2014 7:35 am
Scanning documents and entering data into Medisoft
We have a user that scans patient data and then enters some of that data into a form (I'd call it metadata) on Medisoft. He has to reselect the provider and a couple of other fields every time he scans a document. Before we ran updates to v19 he was able to retain the last selections so he didn't have to re-select the same data every time he scanned.
Is there a way to set up some defaults for him? I haven't found a way.
Thanks
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: Scanning documents and entering data into Medisoft
Walker Tek Solutions, LLC
417-890-6777 x0
fax: 417-763-6386
-
- Posts: 9
- Joined: Wed Sep 24, 2014 7:35 am
Re: Scanning documents and entering data into Medisoft
I think I didn't explain very well about the problem. Here is a snip from the screen in question...we are in Medisoft Clinical Zoom.
The fields highlighted in yellow are the ones that we used to be able to leave alone and not reset between scans.
I would like to hear more about TTScanner so I'll go look for it.
Thanks
Darrell
- Attachments
-
- scanning_defaults.jpg (100.72 KiB) Viewed 24418 times
-
- Posts: 14
- Joined: Thu Jul 12, 2012 9:25 am
- Location: Springfield MO
Re: Scanning documents and entering data into Medisoft
- Attachments
-
- Zoom Config.JPG (53.94 KiB) Viewed 24408 times
-
- Zoom Config.JPG (40.63 KiB) Viewed 24409 times
-
- Posts: 9
- Joined: Wed Sep 24, 2014 7:35 am
Re: Scanning documents and entering data into Medisoft
I'd like to thank you for taking the time to respond to our problem but under the Behavior tab we have the all the upper boxes cleared. The Section field is retained between scans but Title: and Ordered By: need to be re-chosen with each scan.
This behavior changed after our latest update.
Thanks
Darrell
-
- Posts: 14
- Joined: Thu Jul 12, 2012 9:25 am
- Location: Springfield MO
Re: Scanning documents and entering data into Medisoft
My recommendation is to have at least the first two fields selected. If the last radio button is selected in the Default Note Date section then it may clear all of the data.
If trying this does not create any changes, then you may need a technician to look at the issue. We offer tech support service on a month to month basis & annual. We'd be happy to assist you further if needed.
-
- Posts: 2
- Joined: Tue Oct 17, 2017 4:59 am
Re: Scanning documents and entering data into Medisoft
I found that I cannot scan documents if my printer is attached to the USB port of the NAS. The printer is a Multi-Function. Does anyone know what is the problem?
Thanks
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: Scanning documents and entering data into Medisoft
-
- Posts: 2
- Joined: Tue Oct 17, 2017 4:59 am
Re: Scanning documents and entering data into Medisoft
Thanks for the solution. My problem got solved through his.Gavin Walker wrote: ↑Wed Oct 18, 2017 6:26 pmThe computer you are running Zoom from has to be able to see the scanner across the network or the scanner must be plugged directly into the computer you are using.
-
- Posts: 1
- Joined: Mon Mar 12, 2018 7:32 am
Re: Scanning documents and entering data into Medisoft
1. How would I best plan for a record filtering venture..? also, Do you check non-standard-measure records..?
Please ans me...
Thank you in Advanec..
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact: