NPI workaround
-
- Posts: 6
- Joined: Sun May 20, 2007 10:19 am
- Location: Berlin, NJ
NPI workaround
TIA
3D Medical Billing Inc.
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Under normal circumstances you would put the referring provider NPI if there was a referral that needs to be included on the claim.
Purchased Service NPI is required if the claim involves purchased services such as a diagnostic exam obtained from a third party.
I am glad Per-Se is giving a work around. It is my understanding that you will have to upgrade your Medisoft if you continue to use their clearinghouse. Also, if you are using the Stratus Module, then you will need to switch to the Phoenix Module by 12/31/2007.
Walker Tek Solutions, LLC
417-890-6777 x0
fax: 417-763-6386
-
- Posts: 6
- Joined: Sun May 20, 2007 10:19 am
- Location: Berlin, NJ
NPI workaround
3D Medical Billing Inc.
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Either your instructions above are wrong, or the instructions at the Medisoft website are wrong. It is my understanding that you must be on version 11 to send NPIs through Stratus. I would be curious to learn if this solution works on older versions of Medisoft.
Click here for the article on Medisoft's website Entering NPI Information for Medisoft Stratus Customers <the link is not valid anymore, so I removed it.>
-
- Posts: 6
- Joined: Sun May 20, 2007 10:19 am
- Location: Berlin, NJ
NPI workaround
This was the response that I received from Per-se with versions 8-10. I also received an online training session. My problem is that the instructions were not clear. I tried to contact Per-Se but the wait was toooooo long. I will try again today.
3D Medical Billing Inc.