UB04 Smart Screen
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
UB04 Smart Screen
Can you tell me if the UB04 "Smart Screen" does NOT allow you to set certain fields as default. These will be the same codes that are used on every single claim I submit. I use patient quick entry templates to add all new patients. I can add the fields in quick entry for the smart screen but was unable to set a default under the case window?
Previously under the UB04 Tab, I was able to save certain fields and did not have to re-enter these code on every single claim. PLEASE tell me I am missing something because this will be terrible to have to re-enter all this info for every patient.
Thank you!
Bo
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: UB04 Smart Screen
Walker Tek Solutions, LLC
417-890-6777 x0
fax: 417-763-6386
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
I wish Medisoft would really look into the ub04 issues for providers that need this option. I'm a loyal Medisoft user, but with having to re-entering 10-12 of the exact same codes for every claim I send it's just not worth it. As always thank you for responding and PLEASE let the Medisoft people know we need some updates to ub04.
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
Trying to add to my quick entry form the fields I need to be entered in my UB04 smart screen tab. When I add the fields from custom ub04 fields everything goes perfectly. When I open the report and try to use the report I find these 2 random little boxes that I can not get to go away. They do not allow me to enter anything in the field. If I make 2 different quick entry forms with the exact same info, these little boxes will land in another location but always in the custom ub04 smart screen field area. The picture I attached shows them in Service Location & Admission Type on this form, but on different quick entry form they might land next to Patient Status and Value Code 39A. I've made 5 new quick entry forms and the boxes randomly land in this area and there is always 2 on them. What am I doing wrong and how can I stop these little boxes from appearing? I have used quick entry forms for years and never had a problem like this. Just so you know I only captured the bottom portion of my quick entry form, it is a complete patient entry form that I have used for years with no problems. Thanks so much for all your help!
- Attachments
-
- Quick_EntryCapture.JPG (51.4 KiB) Viewed 9062 times
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: UB04 Smart Screen
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
The custom fields that did not have the little boxes next to them... I was able to enter my data and it went on the smart screen tab. I also sent claims via RM no problems. Is this what you were saying I might not could do using revenue management iGuide?
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: UB04 Smart Screen
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
Today I made another quick entry form and included the (custom case) ub04 smart screen fields in it along with the other fields I use when entering new patients. I did not move any of the fields up or down or alter the fields in any way, since I just was wanting to see if any of the little boxes would be on my unaltered form after I saved it. This time 3 little boxes appeared in a completely different area on the quick entry form (case). Before they were in the custom case ub04 area. I clicked in each box and a check mark appeared then a drop down box appeared at the top of my the quick entry form. Clicked it… patient’s names were in it. Does not allow me to enter anything in that field. I am only able to pick a patient from the drop down box, but that is not what I need in that field.
Since these little boxes are randomly appearing in different areas on the quick entry forms and I have made probably a dozen do you think this could be a bug in V21? Prior to V21 I had made numerous quick entry forms for years now… never had a problem with these boxes appearing. Any help greatly appreciated!
- Attachments
-
- Quick Entry2.jpg (96.47 KiB) Viewed 9029 times
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: UB04 Smart Screen
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
Re: UB04 Smart Screen
-
- Posts: 33
- Joined: Tue Oct 23, 2012 6:01 pm
Re: UB04 Smart Screen
[Removing bad files]
[Binding existing data to Dictionary]
[Recreating missing files]
Table: MWCLAE could not be removed
Table: MWTRNE could not be removed
Rebuilding tables
Rebuilding Archive and AR tables
[Recreating Triggers]
[Allowed Access to Data]
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact: