Free Medisoft Support & Other - Courtesy Support Resource

For prospective & existing Walker Tek Solutions' clients. (Remember me for upgrades ~ Gavin)
It is currently Tue Jan 16, 2018 2:41 pm

All times are UTC-05:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri Oct 14, 2016 3:44 pm 
Offline

Joined: Thu Dec 03, 2015 7:36 pm
Posts: 55
Hello!

I have switched to Trizetto as my clearinghouse. I am getting the following rejection message for my work comp claims submitted: "SS number needed for the Subscriber."

Per the set up MedTech gave me for my Medisoft Ver 19 for my previous clearinghouse, i was told for work comp claims, the Subscriber/INsured/Policy holder had to be the Employer, Relationship status had to be Employee. Does that mean that we need to make up an SSN for the Employer as entered?

Trizetto tech also told me: For work comp it will go in the: 2010CA LOOP

Can you pls confirm where the SSN belongs, and if it IS for the Employer, can we make one up as we did for a dob, or do we have to get their TIN?

Please advise. Thank you!


Top
   
PostPosted: Sat Oct 15, 2016 1:19 pm 
Offline
User avatar

Joined: Wed Apr 04, 2007 10:11 pm
Posts: 4002
Location: Springfield, MO
The patient would be the policy holder / employee right? So the SSN goes on the patient. The employer would be setup as an insurance company and set the type to workers' comp.

_________________
Gavin Walker
Walker Tek Solutions, LLC
417-890-6777


Top
   
PostPosted: Sat Oct 15, 2016 1:25 pm 
Offline

Joined: Thu Dec 03, 2015 7:36 pm
Posts: 55
That would be different than how i was told to set it up before.

Right now, Insurance is the work comp carrier (ie Sedgwick, Liberty Mutual, etc)
The Policy Holder is the Employer (ie Dell, Exxon, etc)
Relationship to INsured is then "Employee"

An SSn is already assigned to the patient info under Chart set up.

So where does the SSN go for subscriber? I assume it's the Policy holder.

Or are you saying we need to change the policy holder back to the patient? I'm still not sure how I could set the employer up as an insurance co and where, as the ins co assigned is where the bills have to go.

Hope I'm using the right lingo...


Top
   
PostPosted: Sat Oct 15, 2016 2:51 pm 
Offline
User avatar

Joined: Wed Apr 04, 2007 10:11 pm
Posts: 4002
Location: Springfield, MO
Try entering the Tax ID in the SSN field. We don't have an option for tax id on a guarantor in Medisoft.


Top
   
PostPosted: Mon Oct 17, 2016 11:59 am 
Offline

Joined: Thu Dec 03, 2015 7:36 pm
Posts: 55
Gavin Walker wrote:Try entering the Tax ID in the SSN field. We don't have an option for tax id on a guarantor in Medisoft.
I was unable to find the TIN for the employer, so I made up a 9 digit entry for the SSN field for Policy Holder 1.

Got the same denial: "SSN needed for Subscriber"

I even tried changing back the policy Holder to the Patient and Relationship to Self. I know the pt's SSN is in there.

Got the same denial: "SSN needed for Subscriber"
????


Top
   
PostPosted: Mon Oct 17, 2016 7:35 pm 
Offline
User avatar

Joined: Wed Apr 04, 2007 10:11 pm
Posts: 4002
Location: Springfield, MO
I believe we have a custom IGuide we developed for this. I'll hop on your system to see if you have it. If not, I'll give you ours.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited