Medisoft Data Path V17 sp2

Technical problems with Medisoft.
Post Reply
Jimbo_mmc
Posts: 5
Joined: Thu Oct 06, 2011 9:10 am

Medisoft Data Path V17 sp2

Post by Jimbo_mmc » Thu Sep 27, 2012 2:43 pm

We have installed Medisoft on two new Terminal servers. However each time a user logs it, it is asking for the data path. (medidata)

Is there a registry setting or a config file to edit for this?

i have searched on this forum and have found nothing about it.

the OS is: server 2008 R2 Standard. (64 bit)

i have attempted to add two strings here: HKEY_CURRENT_USER/SOFTWARE/MEDISOFT
Current Practice Path (\\server\medidata\path)
Root Data Path (\\server\medidata)

This was recommended by somone that is familiar with medisoft. However, it only affect the currently logged on user.

any suggestions would be appreciated.

User avatar
Gavin Walker
Posts: 4625
Joined: Wed Apr 04, 2007 10:11 pm
Location: Springfield, MO
Contact:

Re: Medisoft Data Path V17 sp2

Post by Gavin Walker » Thu Sep 27, 2012 11:06 pm

You can change the corresponding registry key for each user instead of on the current user path. If you setup the default user's registry, then new users will default to that path.
Gavin Walker
Walker Tek Solutions, LLC
417-890-6777 x0
fax: 417-763-6386

Post Reply