Page 1 of 1

Purchased Service Info Error

Posted: Mon Sep 21, 2015 5:24 pm
by ld33085
Hello,

New to the boards here. We just started using Medisoft v19 in our DME office and are having issues with Revenue Management. Previously, we were sending our files to our clearinghouse, Zirmed using the Print CLP format with no problems. Now, every time we send the file to them, we are getting a different rejection messages, most recently stating " Line level Purchased Service Provider Identifier is invalid or missing" and refers us to Loop 2400 Segment PS 101. Where in Medisoft can this information be updated? There should not be anything for us to put here, nor were we ever asked this. Any help is appreciated.

Thanks in advance.

Re: Purchased Service Info Error

Posted: Mon Sep 21, 2015 9:11 pm
by Gavin Walker
On the Facility record for the claim on the Facility IDs tab, make sure the ID that is being used in the grid has an NPI filled out on it.

Re: Purchased Service Info Error

Posted: Tue Sep 22, 2015 2:03 pm
by ld33085
Thanks for the reply!
Checked this and confirmed our facility NPI is in the grid. Any other ideas? :?:

Re: Purchased Service Info Error

Posted: Tue Sep 22, 2015 6:58 pm
by Gavin Walker
Which iGuide are you using? 837P MS19 5010 Claims - Standard?

Re: Purchased Service Info Error

Posted: Wed Sep 23, 2015 10:32 am
by ld33085
How do we determine which iGuide we are using?

Re: Purchased Service Info Error

Posted: Wed Sep 23, 2015 6:36 pm
by Gavin Walker
Go to Configure -> Receivers and select your receiver. On the far right click the Tx Sets column. Then check the iGuide field. If you aren't used to working in here it is kind of tricky re-sizing the columns so you can see everything.

Re: Purchased Service Info Error

Posted: Thu Sep 24, 2015 5:35 pm
by ld33085
You were right, that was tricky!
We are using Outbound Claims (837P MS19 5010 claims - standard)

Re: Purchased Service Info Error

Posted: Thu Sep 24, 2015 8:07 pm
by Gavin Walker
Your situation is just too complicated to diagnose here. I would be willing to help you out with a Revenue Management Claims setup for one practice. We currently charge $150 for this service.