Medisoft Network Pro SP1 on 64 bit Vista system
-
- Posts: 8
- Joined: Wed May 27, 2009 11:44 am
Medisoft Network Pro SP1 on 64 bit Vista system
Thanks,
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
-
- Posts: 8
- Joined: Wed May 27, 2009 11:44 am
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
To correct Maximum Work Areas, run Advantage Configuration Utility on the server and add the number of work areas you currently have configured plus the number of rejected work areas and double that on the configuration tab. Any other values that have used more than half of their set value should be doubled as well.
The old Medisoft knowledgebase is completely gone now, so I removed the link.
-
- Posts: 8
- Joined: Wed May 27, 2009 11:44 am
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
-
- Posts: 8
- Joined: Wed May 27, 2009 11:44 am
Everything turn out ok except for a small problem. Here's my setup for the office.
Emachine Desktop (Vista Business, 32 bit, Server Advantage 8.1, Medisoft 14 SP2, Wired) ----> 2Wire Router ---> HP TouchSmart 524 (Vista Ultimate, 64 bit, Medisoft 14 SP2, Wireless)
Medisoft on HP machine can connect and open but ask \"Create New Data Set or Convert Old Data Set\", Dataset already been created and running fine on the Emachine (Server). What can I do to correct this? It seem like it is not reading the dataset created by the server.
Do I need to upgrade the Server Advantage Database to 9.1? I saw that the latest version but don't know if I need it or not.
Thank you in advance,
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
-
- Posts: 8
- Joined: Wed May 27, 2009 11:44 am
Folder was created and shared before the data on the server was created. What is hold F7 do? Run as Administrator? If yes it is already set to Run as Administrator. When I open the client on the second comp (HP comp), it doesn't ask for data path but it ask if I want to create new dataset or convert. I don't want to overwrite what already on the server in the shared folder.
Thanks,
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact:
-
- Posts: 8
- Joined: Wed May 27, 2009 11:44 am
- Gavin Walker
- Posts: 4626
- Joined: Wed Apr 04, 2007 10:11 pm
- Location: Springfield, MO
- Contact: