UB-04 form

General information about Medisoft
Post Reply
MyChoice
Posts: 2
Joined: Wed Nov 18, 2015 12:12 pm

UB-04 form

Post by MyChoice » Wed Nov 18, 2015 1:59 pm

Need to print 0 or 9 in box UNDER box 66DX on UB-04 claim form

User avatar
Gavin Walker
Posts: 4625
Joined: Wed Apr 04, 2007 10:11 pm
Location: Springfield, MO
Contact:

Re: UB-04 form

Post by Gavin Walker » Wed Nov 18, 2015 7:21 pm

This is only supported on Medisoft v19 or higher and it should calculate automatically if you use the "v19" version of the UB04 report template.
Gavin Walker
Walker Tek Solutions, LLC
417-890-6777 x0
fax: 417-763-6386

MyChoice
Posts: 2
Joined: Wed Nov 18, 2015 12:12 pm

Re: UB-04 form

Post by MyChoice » Thu Nov 19, 2015 4:26 pm

Thank you.....Have the right form now, having issues getting the number in the box. I modified the form so everything lines up but I can't get the 9 or 10 in the box to the left and was wondering if the margins can be moved?

User avatar
Gavin Walker
Posts: 4625
Joined: Wed Apr 04, 2007 10:11 pm
Location: Springfield, MO
Contact:

Re: UB-04 form

Post by Gavin Walker » Fri Nov 20, 2015 12:52 am

Did you try a negative value in the left margin in report properties? The margins on the UB04 are pretty tight. Some printers just aren't capable to print that far to the left.

Post Reply