Page 1 of 1

Scanning documents and entering data into Medisoft

Posted: Mon Dec 08, 2014 11:43 am
by darrellsmith
I'm still new to Medisoft, but the practice has been on version 19 for some time.

We have a user that scans patient data and then enters some of that data into a form (I'd call it metadata) on Medisoft. He has to reselect the provider and a couple of other fields every time he scans a document. Before we ran updates to v19 he was able to retain the last selections so he didn't have to re-select the same data every time he scanned.

Is there a way to set up some defaults for him? I haven't found a way.

Thanks

Re: Scanning documents and entering data into Medisoft

Posted: Mon Dec 08, 2014 3:05 pm
by Gavin Walker
I assume you are setting a few fields on the Case before scanning. You can use the Set Defaults button to setup the defaults for a new case. If Defaults get setup the wrong way, you can press CTRL and then the button changes to Remove Defaults to remove them. The most elegant scanning solution I have found for Medisoft is with a third-party solution called TTScanner that we carry. TTScanner will streamline things even further for you.

Re: Scanning documents and entering data into Medisoft

Posted: Tue Dec 09, 2014 9:50 am
by darrellsmith
Thanks Gavin

I think I didn't explain very well about the problem. Here is a snip from the screen in question...we are in Medisoft Clinical Zoom.

The fields highlighted in yellow are the ones that we used to be able to leave alone and not reset between scans.

I would like to hear more about TTScanner so I'll go look for it.

Thanks
Darrell

Re: Scanning documents and entering data into Medisoft

Posted: Tue Dec 09, 2014 4:42 pm
by RiaH
The screenshot you posted is from Zoom inside of Clinical. The only Configuration options available are under File > Configuration > Behavior Tab. Here you can select/or not, to Clear patient/insurance data after saving along with select/or not to Clear Note/Attachment data after saving (this last one I believe you want deselected).

Re: Scanning documents and entering data into Medisoft

Posted: Wed Dec 10, 2014 8:46 am
by darrellsmith
RiaH-

I'd like to thank you for taking the time to respond to our problem but under the Behavior tab we have the all the upper boxes cleared. The Section field is retained between scans but Title: and Ordered By: need to be re-chosen with each scan.

This behavior changed after our latest update.

Thanks
Darrell

Re: Scanning documents and entering data into Medisoft

Posted: Wed Dec 10, 2014 11:40 am
by RiaH
Darrell,

My recommendation is to have at least the first two fields selected. If the last radio button is selected in the Default Note Date section then it may clear all of the data.
If trying this does not create any changes, then you may need a technician to look at the issue. We offer tech support service on a month to month basis & annual. We'd be happy to assist you further if needed.

Re: Scanning documents and entering data into Medisoft

Posted: Tue Oct 17, 2017 5:06 am
by carine14
Hi,
I found that I cannot scan documents if my printer is attached to the USB port of the NAS. The printer is a Multi-Function. Does anyone know what is the problem?
Thanks

Re: Scanning documents and entering data into Medisoft

Posted: Wed Oct 18, 2017 6:26 pm
by Gavin Walker
The computer you are running Zoom from has to be able to see the scanner across the network or the scanner must be plugged directly into the computer you are using.

Re: Scanning documents and entering data into Medisoft

Posted: Sat Oct 21, 2017 12:07 am
by carine14
Gavin Walker wrote:
Wed Oct 18, 2017 6:26 pm
The computer you are running Zoom from has to be able to see the scanner across the network or the scanner must be plugged directly into the computer you are using.
Thanks for the solution. My problem got solved through his.

Re: Scanning documents and entering data into Medisoft

Posted: Mon Mar 12, 2018 8:03 am
by daria719
Hello...

1. How would I best plan for a record filtering venture..? also, Do you check non-standard-measure records..?
Please ans me...
Thank you in Advanec..

Re: Scanning documents and entering data into Medisoft

Posted: Mon Mar 12, 2018 8:55 am
by Gavin Walker
Hi Daria, can you start a new topic and provide more details on what it is you are trying to do?